Delivery of the design, engineering and safety case assessment work required by the Sellafield Site. This type of work includes:
— initial studies, concept and preliminary phases in delivering design and safety assessment packages,
— detailed design, procured construction phases working with implementation contractors,
— the maintenance of design intent,
— support to operational plants including operational safety cases, condition surveys, root cause analysis, refurbishment and enhancement design packages, and assessments of existing assets,
— support to post-operational clean out and decommissioning.
These services will be provided for delivery and support of the range of plant and equipment at both the Sellafield and Capenhurst sites. To enable effective management the requirement is broken down into 4 main system lots based on system technologies, so that each lot incorporates all design and engineering and other work, including (but not be limited to) safety case, test rigs, trials investigations, consultancy support etc; as required to deliver a complete system design. The lots shall consist of:
— lot 1: mechanical handling systems,
— lot 2: mechanical handling systems,
— lot 3: process plant systems,
— lot 4: process plant systems,
— lot 5: control, electrical and instrumentation (CE&I) systems,
— lot 6: control, electrical and instrumentation (CE&I) systems,
— lot 7: civil, structural and architectural (CS&A) systems,
— lot 8: civil, structural and architectural (CS&A) systems.
The total cost of the scope is hard to define and thus a broad range has been identifed. Sellafield Ltd's estimated contract value per lot is further developed within the tender documentation.
Please see the tender documentation for more information.
Excluding VAT
Range between 900 000 000 and 1 500 000 000 GBP
Contact:
Sellafield Ltd
Hinton House, Birchwood Park Avenue, Risley
Attn: Paul RF Tuohy
WA3 6GR Warrington
UNITED KINGDOM
Tel. +44 1925832082
E-mail: paul.rf.tuohy@sellafieldsites.com
LOT NO: 1 TITLE Mechanical handling systems
1)SHORT DESCRIPTION
Design, engineering and safety case development of mechanical handling technologies as used in applications for handling and movement of nuclear material. These technologies would typically include robotics, cranes, transportation, handling, and special purpose equipment systems. The materials to be handled include pelletised nuclear fuel and radioactive/contaminated material that may be loose or containerised within cans, drums and flasks. These mechanical handling systems may be situated within radiological containment barriers such as cell or glovebox structures depending on the nature of the radiological hazard.
2)COMMON PROCUREMENT VOCABULARY (CPV)
71311000, 71311100, 71311300, 71312000, 71320000, 71321000, 71321100, 71321200, 71321300, 71321400, 71322000, 71322200, 71322300, 71323000, 71323100, 71323200, 71326000, 71332000, 71333000, 71334000, 71335000, 71336000, 71337000, 71340000
3)QUANTITY OR SCOPE
Please refer to tender documentation for full details.
Excluding VAT
Range between 90 000 000 and 225 000 000 GBP
LOT NO: 2 TITLE Mechanical handling systems
1)SHORT DESCRIPTION
Design, engineering and safety case development of mechanical handling technologies as used in applications for handling and movement of nuclear material. These technologies would typically include robotics, cranes, transportation, handling, and special purpose equipment systems. The materials to be handled include pelletised nuclear fuel and radioactive/contaminated material that may be loose or containerised within cans, drums and flasks. These mechanical handling systems may be situated within radiological containment barriers such as cell or glovebox structures depending on the nature of the radiological hazard.
2)COMMON PROCUREMENT VOCABULARY (CPV)
71311000
3)QUANTITY OR SCOPE
Please refer to tender documentation for full details.
Excluding VAT
Range between 90 000 000 and 217 500 000 GBP
LOT NO: 3 TITLE Process systems
1)SHORT DESCRIPTION
Design, engineering, and safety case development of process, piped service and ventilation technologies as used in applications for the processing and storage of liquid and gaseous nuclear material. These technologies would typically include ion exchange, evaporators, encapsulation and vitrification processes, etc. This process plant may be situated within radiological containment barriers such as cell or glovebox structures depending on the nature of the radiological hazard.
2)COMMON PROCUREMENT VOCABULARY (CPV)
71311000
3)QUANTITY OR SCOPE
Please refer to tender documentation for full details.
Excluding VAT
Range between 90 000 000 and 225 000 000 GBP
LOT NO: 4 TITLE Process systems
1)SHORT DESCRIPTION
Design, engineering, and safety case development of process, piped service and ventilation technologies as used in applications for the processing and storage of liquid and gaseous nuclear material. These technologies would typically include ion exchange, evaporators, encapsulation and vitrification processes, etc. This process plant may be situated within radiological containment barriers such as cell or glovebox structures depending on the nature of the radiological hazard.
2)COMMON PROCUREMENT VOCABULARY (CPV)
71311000
3)QUANTITY OR SCOPE
Please refer to tender documentation for full details.
Excluding VAT
Range between 90 000 000 and 217 500 000 GBP
LOT NO: 5 TITLE Control, electrical and instrumentation (CE&I) systems
1)SHORT DESCRIPTION
Design, engineering and safety case assessment of control, electrical and instrumentation systems. These standalone, integrated CE&I systems would typically include:
— plant control and data acquisition systems and associated networks,
— plant information computer systems,
— radiometric and nuclear instrumentation systems,
— alarm systems,
— power distribution systems up to 11KV,
— electrical building services,
— security systems,
— safety instrumented systems,
— nuclear materials accountancy systems.
2)COMMON PROCUREMENT VOCABULARY (CPV)
71311000
3)QUANTITY OR SCOPE
Please refer to tender documentation for full details.
Excluding VAT
Range between 45 000 000 and 135 000 000 GBP
LOT NO: 6 TITLE Control, electrical and instrumentation (CE&I) systems
1)SHORT DESCRIPTION
Design, engineering and safety case assessment of control, electrical and instrumentation systems. These standalone, integrated CE&I systems would typically include:
— plant control and data acquisition systems and associated networks,
— plant information computer systems,
— radiometric and nuclear instrumentation systems,
— alarm systems,
— power distribution systems up to 11KV,
— electrical building services,
— security systems,
— safety instrumented systems,
— nuclear materials accountancy systems.
2)COMMON PROCUREMENT VOCABULARY (CPV)
71311000
3)QUANTITY OR SCOPE
Please refer to tender documentation for full details.
Excluding VAT
Range between 45 000 000 and 127 500 000 GBP
LOT NO: 7 TITLE Civil, structural and architectural systems (CS&A)
1)SHORT DESCRIPTION
Design, engineering and safety case assessment of civil structures including input to plant lifetime extension, civil maintenance and asset care, sustainability and decommissioning proposals.
2)COMMON PROCUREMENT VOCABULARY (CPV)
71311000
3)QUANTITY OR SCOPE
Please refer to tender documentation for full details.
Excluding VAT
Range between 90 000 000 and 180 000 000 GBP
LOT NO: 8 TITLE Civil, structural and architectural systems (CS&A)
1)SHORT DESCRIPTION
Design, engineering and safety case assessment of civil structures including input to plant lifetime extension, civil maintenance and asset care, sustainability and decommissioning proposals.
2)COMMON PROCUREMENT VOCABULARY (CPV)
71311000
3)QUANTITY OR SCOPE
Please refer to tender documentation for full details.
Excluding VAT
Range between 90 000 000 and 172 500 000 GBP
Related ArticlesGerman JV on top as UK land auction ends NDA starts Sellafield land disposal Iberdrola/GDF consortium buys Sellafield land for GBP70 million SSE pulls out of UK nuclear venture
