US-based Type One Energy Group has completed its $200m Series B financing round to advance its FusionDirect technology development programme. This round brings Type One’s total funding to date to over $400m.
The funding round was co-led by Bill Gates’s Breakthrough Energy Ventures and Clutterbuck Capital. Major participating backing came from new investors – Lowercarbon Capital, Siemens Energy Ventures, and SiteGround Capital. According to PitchBook data, this is the third-biggest Series B raise in the fusion energy sector over the last five years.
The new capital is earmarked to propel Project Infinity, the company’s multi-phase deployment initiative based at the Tennessee Valley Authority’s (TVA) retired Bull Run coal power plant in Clinton, Tennessee. This comprises:
- Infinity One – building out the engineering prototype stellarator machine, with target commissioning slated for 2029; and
- Infinity Two – advancing the design of a 400 MWe commercial fusion power plant intended to supply enough energy for 200,000 homes by 2034.
“The breadth and quality of investors in this funding round demonstrates growing support for our strategy to industrialize the commercial deployment of fusion energy,” said Type One CEO Christofer Mowry. “The Series B financing enables us to remain focused on advancing our stellarator technology and Project Infinity design activities, while working with experienced industrial partners to deliver the first commercial fusion power plant at TVA’s Bull Run site.”
The announcement closely follows a major regulatory milestone. In September, Tennessee granted Type One Energy the first-ever state-level fusion operating licence under its newly enacted framework.
The roadmap for the Infinity One prototype spans a series of critical engineering milestones to achieve target operations by 2029. This multi-phase programme serves as the final step before commercialisation of Type One’s stellarator technology.
On-site construction and assembly is set for 2027-2028. This will see physical installation of the Infinity One stellarator machine inside the Bull Run site; assembly of the advanced high temperature superconducting (HTS) magnet modules; and integration of the 3D-printed structural support shells designed to withstand immense magnetic forces.
The completion and initial plasma commissioning of Infinity One will verify the physics of plasma confinement, steady-state operations, and structural durability without generating net commercial electricity. From 2030-2034, data extracted from Infinity One will be continuously applied to the design of Infinity Two.
To keep this timeline on track, Type One Energy must navigate three primary engineering challenges over the next 36 months:
- Securing thousands of kilometres of uniform high-temperature superconducting tape from specialised global suppliers;
- Fabricating vacuum vessel within millimetre-level tolerances to prevent plasma leakage; and
- Finalising the physical and regulatory connection points to transition the old coal infrastructure into a modern fusion test bed.
Type One Energy’s stellarator design differs fundamentally from conventional tokamaks in how it shapes and controls the high-energy plasma needed for fusion. While both systems use powerful magnetic fields to confine plasma inside a ring-shaped vacuum vessel, they use entirely different mechanical and physics-driven pathways to achieve this goal.
A standard tokamak features a uniform, doughnut-shaped layout (axisymmetric). To trap the plasma, it requires a massive electrical current to be actively driven through the plasma itself. Type One’s stellarator is a current-free system. Instead of relying on an internal plasma current, it loops the plasma inside a complex, twisted 3D magnetic track created entirely by highly intricate external coils.
While the tokamak is prone to violent, unpredictable plasma disruptions if the internal current collapses, the stellarator is inherently stable. Compared with the on/off cycles of the tokamak, due to transformer current limitations, the stellarator offers seamless, continuous steady-state operation ideal for baseline grid power. However, the tokamak is much simpler. In short, the stellarator is extremely complex to calculate and engineer, but structurally simpler to operate.
Stellarators have historically been sidelined because calculating the exact mathematical twist of the 3D magnets was nearly impossible. Type One Energy overcomes this engineering bottleneck through its specialised FusionDirect platform, which blends three core advancements:
- Using modern supercomputing to model quasi-symmetric magnetic fields. This ensures the magnetic field acting on the plasma remains perfectly uniform despite the warped, asymmetric structure of the physical magnets.
- Rather than standard copper or low-temperature magnets, Type One integrates advanced HTS magnets. This allows the reactor to generate immense, ultra-strong magnetic fields inside a significantly tighter, more compact machine footprint.
- Leveraging robotic fabrication and 3D printing techniques to manufacture non-planar (curved) magnets accurately, mitigating the cost overruns that historically stalled stellarator commercialisation.
Type One Energy was founded in 2019 as an academic spin-out combining academic expertise from the University of Wisconsin-Madison (a world leader in stellarator research) with talent from the Oak Ridge National Laboratory (ORNL). It is headquartered in Knoxville, Tennessee, having relocated its main corporate base there from Madison, Wisconsin, following a major state-backed expansion plan.
While Knoxville serves as the primary global headquarters, the company operates across several international and regional hubs to support its engineering and computational development Clinton, Tennessee is home to the expanding Research and Development Centre and the deployment site for Project Infinity.
In addition, there is a regional office in Madison, Wisconsin, and a regional engineering office in Woburn, Massachusetts. A Canadian software and advanced computing office in Vancouver supports exascale physics modelling. The European headquarters is based in the UK at the Culham Innovation Centre in Oxfordshire, anchoring the company’s UK Infinity Fusion Consortium efforts. Type One is progressing a second commercial fusion deployment project through the UK Infinity Fusion Consortium, working with Tokamak Energy, AECOM, Sheffield Forgemasters and Barclays.